Mar 12, 2013

Why is it important to know how to make the classic model of shoes?


When I studied at the Art Academy in Jerusalem, I was very fond of classical drawing lessons, because I understood that in the future  for  me to be able to draw any of  my fantasy figure, I must first learn the basics. So, in whatever  you touch upon, in any field, you must first learn the basics of the subject, in which you would like to achieve perfection. At the shoe craftsmanship such a basis, in my opinion, is the study of all the classic shoe models based on which you can make any shoe.

So to be a designer that is not only "creates" and by that I mean "makes a pretty drawing on a paper", but also can really make any of his ideas, it is important to know the construction of the classic shoe models. While I personally have never made any classic model of shoes (in a his "clean definition") in my own collections
, I have all my models designed only because my knowledge on how to structure classic models of shoes. Those  models as they are, in terms of design, don't interest me, but the knowledge of their design gives me the freedom to create. They, like the alphabet, for those who wish to be a writer.


Mar 6, 2013

MAKING SHOES- NEW TUTORIAL, NEW GUIDE, NEW BEGINNING

buy

Today, I have a special treat for you and I know that many of you been asking me to do this one for a long time so here it is , my new tutorial for "Flat Women Peep Toe Shoes". This is a complete tutorial from drawing on the last to complete pair of shoes. You will find the full and exclusive tutorial below but first I have few announcements that I'm sure you'll be interest in .

Feb 5, 2013

How to make Penny Loafer shoes with tassels


1) As usual paste the adhesive tape on the last and draw your Penny Loafers with tassels on the same principle as we did with  loafers  in the book(Penny Loafers Full Guide). Only at the point D (reference to the book) from the tongue to the sideline make round transition. Tassels and leather laces visually must continue this transition.

Feb 2, 2013

How to make shoe pattern with folds



It is example for basing sandal with folds



 I want to show you how to make this kind of pattern. This is one of the existing methods.


Basic model
1) Tape adhesive tape on the shoe last , draw a sandal , cut and paste the  adhesive tape pattern on a piece of cardboard. Reference to the first 2 points in the previous post about the T Strap Sandals.


Jan 14, 2013

Here’s a Quick Way to Make Basic Pattern for Asymmetrical Shoes



Today I want to show you a small tip, as to double a basic model, meaning, to merge outer and inner side of patterns in one point, so you can do it on any asymmetric shoes. First you need to do is to make correct basic model of the last, on which you wish to continue to do asymmetric model. And this tested basic model to double as follows:
1) Transfer to a piece of cardboard all basic patterns lines, including outer and inner lines for lasting.
2) Draw a straight line from the nose to the point С 


Jan 9, 2013

Learn to Make an Insole Pattern and New Full Guide for Penny Loafer Shoes



After the holidays, as always, there is a lot of unfinished business. I'm working on one shoe last, well checking if it's right, and then basing on this last I want to build another one. That is by the way what I do, I construct all my last.

 Lack of normal production of shoe lasts in Israel (as well as all other services of the footwear industry) leaves me no choice as to construct it by myself, to achieve the desired result. Just between us, to be honest, through trial and error, I learned how to make shoe lasts. But as much as difficult as it might be, it gave me the freedom to make any type of shoes that my imagination creates and that is all I want.
So at the same time I decided to show you how I make inside, solid insole pattern. It is based on the midsole pattern (link to video), but we need to add a small change to it:


1) On the inner side from point A to point B through C1 draw a smooth line. 





Dec 30, 2012

Make Central Line Like a Pro








Merry Christmas and a Happy New Year to all my readers! Let him bring joy and good luck to all of us!
I haven't written a post for a while, It was a very busy month. As always before the holidays we all possessed with shopping and I'm not an exception.
 All that we haven't bought during the year, we buy on sale before the New Years. So I have had a lot of orders, because shoes and diamond are girl best friends.  Besides, I had an freelance project this month, that is still on the roll and therefore had no time to write. 

Nov 22, 2012

Single cut pattern for high heel pumps











Boat shoes model, in spite of its apparent simplicity is one of the complex shoes to make. The complexity is in precise of lines that are to be performed. It is in the crew neck, in the so-called cleavage, concentrated all the beauty of the shoes, which should emphasize the graceful curve of the foot. 



Therefore, in the construction of boats all the focus on finding beautiful deep cut on the last
. When I was in Italy, I took a course conducted by boots pattern teacher, who was nicknamed the King of boats. His name was Bruno. He was already retired, but he was still invited to all the shoe factories in the area where I went to school, to make pattern of a boat for them. This wonderful teacher showed us an interesting method for constructing single cut pattern pumps with high heels. It is quite difficult to do and requires a lot of experience. I want to show and explain to you the key point of this method. How from basic pattern, requiring dividing boat patterns on two parts (the seam on the inside of the boat), to make a single cut basic pattern.

Step by step guide "Single cut pattern  for high heel pumps"

Nov 10, 2012

Little Known Ways for Springing a Basic Pattern



Often making the correct pattern depends on how we attach it to the cardboard. It's so simple, but at the same time a critical point in the process of work on the basic pattern. But with the help of two simple cuts on patterns we can easily fix it. If we glued pattern below the desired angle, then we close it in the incision. If it turned out with a sharp angle, we will open it in the incision. To do this, you first need to find the lowest point in the pattern curve at the front of the last. It is located in the center of the intersection of a straight line drawn from the middle toe and the other a straight line drawn from the center of arc.

 From this point it is necessary to draw a straight line down and incise it to the middle. Then back down 2 mm and then  continue to the end of a cut in a straight line down. Thus, closing the incision at the top (or, opening, depending on the need), pattern angle is reduced, and opens at the bottom at the same time. The pattern is not deformed, and is easily corrected by using these two simple cuts. And you don't have to make a new pattern with a scotch tape.





Oct 24, 2012

Best Effective Method in Shoe Making and Maria Mastori Jewelry



I have said many times that I wanted to make shoes as master shoemakers of the past, but that does not mean that I blindly follow the traditions of shoe making  on the contrary, sometimes I break them. I like to find a shorter and easier way to achieve the result, even if it is not accepted in the footwear techniques, because I always have effective approach for solving the problem, whether it be technical or stylistic.

 Effective means the best for me, for shoe design. If shoes are difficult to sew, that is, its execution takes a lot of time, but that is the way I see it this constructed, for me it effectively to sew how long it will take. Therefore, no matter what, I will always find effective, in my understanding, methods. For example, very often, when I want to quickly check something and I do not have a suitable insoles for shoes, I'm doing it out of the one I have at the moment. 
Maybe this is not quite correct way to make an insole, but it very quickly done and I don't have to wait till the next day to go and order it on the factory. So for me it is effective at that moment, means it is right. For those who are faced with a lack of appropriate insoles in the process, this is little tutorial that will fix the problem.


Web Statistics